Assembly Support - Trike
Only 1 side of the shade sale will move freely. The other side has a button on the side that needs to be pushed to move the shade sail.
Thu, 5 Mar, 2020 at 2:07 PM
Please loosen the front clamp, hold the front wheel still and turn the handlebars 180 degrees. Then tighten the clamp and turn the handlebars around the cor...
Thu, 5 Mar, 2020 at 2:25 PM
The seat does not have any holes drilled when brand new as standard. Please use the palm of your hand and the bolt to press the bolt through the thin plasti...
Thu, 5 Mar, 2020 at 2:25 PM
To realign the parent steering handle, please adjust the washers and bolts that connect the parent steering handle to the rod either left or right. See imag...
Thu, 5 Mar, 2020 at 2:25 PM
It sounds like the brake has not been connected correctly which has in turn not allowed the axle to reach the other side of the wheel assembly. Please check...
Thu, 5 Mar, 2020 at 2:25 PM
Please see detailed instructions here - https://littlenation.com.au/wp-content/uploads/2021/09/Push-Trike-Manual.pdf
Thu, 3 Feb, 2022 at 10:48 AM
Please use the red leaver located on the front wheel to connect and disconnect the pedals to the front wheel. The red leaver will disconnect the pedals from...
Mon, 8 Aug, 2022 at 3:47 PM
Please check the footrest is connected correctly. The square holes go through the frame and the round edged holes goes through the footrest. Please let us k...
Mon, 16 Mar, 2020 at 9:50 AM
Please pull down the middle black plastic sleeve/leaver to release the footrest.
Thu, 11 Jun, 2020 at 2:09 PM
Please see attached assembly video for the Push trike footrest.
Tue, 30 Nov, 2021 at 2:56 PM